6U Wall Mounted Data Cabinet 600х400 with Glass Door
Server cabinet IPCOM SN-6U-06-04-DS-1-7035 is designed to accommodate 19'' active network equipment in office buildings and industrial premises. The use of the cabinet is almost universal, due to its size and static load of 120 kg, which is distributed over the design of the cabinet, and serves to solve various problems in building a communication center. The height of the cabinet is 6U, the width and depth are 450mm. The glass door allows you to access the equipment without opening it. For equipment in a closed cabinet, ventilation is an important factor. Air circulates thanks to the ventilation holes on the side walls. It is possible to install fan units in the top and bottom walls of the cabinet; for this, it is necessary to dismantle the plugs and fix the fans with screws. Grounding is provided as standard. You will not have any problems with installation, since the side walls can be easily removed, and then attached with a latch that is located inside the cabinet. Thus, the installation of equipment can be done from 3 sides. The cabinet is suspended by 4 holes on the rear ribs. Delivery is carried out unassembled, which optimizes the cost of delivery. Assembly of the cabinet is carried out within half an hour. The weight of the cabinet is 10.54 kg. It has 2 unit racks. Dimensional drawing and passport are available in the documentation section.
Dimensions (WxDxH), mm | 600х266х450 |
Adjustment step of mounting legs, mm | 20 |
Degree of protection | IP20 |
Door opening angle | 180° |
Door type | Glass |
Max. stat. load, kg | 60 |
Type of execution | Wall mounted |
Cable glands | at the base and roof |
Coverage | powder-polymer |
Color | Light gray (RAL 7035) |
Manufacturer | IPCOM |
Country of manufacture | Ukraine |
Warranty | 12 months |